Location of 12 Volt Power Circuit Fuses on 2010 Chevy Colorado
Question:
Hello, I saw the response on the location of the fuse on a 2012 colorado, I cannot locate anything that looks like that, would a 2010 be a different fuse holder? There is a round connector in about that position, beside the battery box after the alternator, but I do not know if this is a fuse holder or a connector. I wouldnt image that on a 2010 it would have a round glass fuse, which would be what might be in that item if it is not just a connector. Any help is appreciated. Thanks
asked by: George
Expert Reply:
I pulled up the owners manual of your 2010 Chevy Colorado and it has the fuses for the trailer wiring in the same location as the picture of the 2012 that you mentioned.
You might have to dig around a bit lower to see if you can find it as it should be there as long as your vehicle has factory wiring.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator
- Q&A: No Splice Tow Bar Lighting Kit Recommendation for 2024 Jeep Wrangler
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150