Replacement Equalizers and Leaf Springs for Tandem Axle with 3,500 lb Axles

Question:

I have a random axle trailor with one Dexter/Phillips axle 3500# and one quality trailor products 3500# axle that needs new leaf springs and thought about replacing all four has one Brocken leaf spring on rear axle now , and noticed that the middle bulky parts holes are worn quite a bit and the small flat parts that bolt to the axle are as we ll but all hangers seem fine that are welded to the trailor and might as well replace all axle bolts to do any kinds of suggestions you can give me be great . Leaf springs are 251/4inch center to center thanks

asked by: Jayson A

Expert Reply:

Sounds like it's a good time to replace all of the leaf springs and equalizers. So for springs the part # e54SR would be a great option as this is a tiny bit shorter than your current springs (they stretch slightly over time), and they are rated for 3,500 lb axles.

Then for an equalizer kit the part # AP233 would replace all of your bolts, equalizers, shackles, and nuts.

expert reply by: Jameson C