Compatibility of the Bearing Buddy Grease Seal Set with Posi-Lube Spindles
Question:
Will i be able to use this seal on a posi-lube spindle?
asked by: Benny K
0
Expert Reply:
To make sure the Bearing Buddy Grease Seal Kit, # BB60002, will be compatible with your Posi-Lube spindles, a measurement on the spindle where this seal will sit.
The inner diameter of the steel ring for this set measures 1.377 inches. Your spindle will have to fall within this measurement for this seal kit to fit.
I have attached a diagram of where you will need to measure on your spindle to find the correct measurement.
expert reply by:
Jared P
0
![Jared P](https://images.etrailer.com/static/images/catg/people/1067_tn.jpg)
Product Page this Question was Asked From
Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.875 Inch I.D.
- 2.560 Inch O.D.
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Does Bearing Buddy Seal Kit # BB60002 Fit 3,500 lb Trailer Axle
- Q&A: Idler Hubs, Bearings, Seals and Grease For a 2015 V22L ShoreLand'r Boat Trailer
- Q&A: Correct Replacements for Dexter 023-359-00 Left Hand and 023-360-00 Right Hand Braking Assemblies
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement Brake and Hub Assemblies for Travel Trailer
- Q&A: Does Going with Higher Rated Brake Assembly Give you Additional Braking Strength
- Q&A: Replacement Bearings, Seals, Hubs For 2021 Riverside Retro 135 With 3,500 lb Axle
- Q&A: Replacement Fabric for 14 Solera Awning
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Converting Your RV Water Heater to Tankless
- Article: Testing Trailer Brake Magnets for Proper Function