2006 Holiday Rambler Navigator Brake Controller Install Recommendation

Question:

Hi I believe my 2006 Navigator is wired for a brake controller but I cant seem to find where the wire is at on my coach. On my other coaches the wire was tied up under the dash with a tag indicating what is was. Any help would be appreciated. Thanks

asked by: FRANK A

Expert Reply:

On some Holiday Ramblers the wiring port for a trailer brake controller can be found under the left side control panel next to the driver's seat. The four wires should be +12V (black), brake switch signal (red), brake output (blue) and ground (white). On others it can be located under the left side of the dash and labeled "Brake" with 6 wires. Check there and let me know if you can find it.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.

expert reply by: Jameson C