How to Pick Out Replacement Hub and Bearings for 1997 Triton Snowmobile Trailer
Question:
1997 Triton snowmobile trailer hub assemblies. Looking for combo kit for two complete hub,bearings,seal,bearing buddies? Thanks
asked by: Will W
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Search Results: trailer bearings
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Steel Solid Center Trailer Wheel - 10" x 6" Rim - 5 on 5-1/2 - White
- Shop: Chrome Trailer Wheel Lug Nut - 1/2" (Each)
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Axle for Dexter Torsion 2,200 lb Axle on 2005 Blizzard 10T Snowmobile Trailer
- Q&A: Working Running Lights, But No Turn Signals or Brake Lights On Trailer
- Shop: CE Smith Spare Tire Mount for Trailers - Steel - 4- and 5-Lug Wheels - 8-3/8" Long
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Search Results: marine grease
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-2K Review
- Q&A: What Size Spindle Does the Trailer Idler Hub Assembly # AKIHUB-545-35-G-K
- Search Results: 18.5x8.5x8 trailer tire
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Video: Review of LubriMatic Lubricants Sealants Adhesives - Grease - L74FR
- Video: Timbren Trailer Hubs and Drums - Hub - TA88545-2 Review
- Q&A: Replacement Hubs for Aluma 8610T Snowmobile Trailer.
- Search Results: 84 spindle
- Search Results: l44649 bearing
- Q&A: Can Trailer Tire Size 20.5x8-8 be Replaced with 20.5x8-10 on Snowmobile Trailer
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Where to Find Bearing Part Numbers for EZ Loader Trailer
- Search Results: dexter ez lube
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-1K Review
- Search Results: bearing buddy
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258-50UC1-EZ Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub