Information Needed to Pick Out Replacement Hub for Boat Trailer

Question:

Dear Sir I want to buy Hub for 14-foot boat trailer and I can not guarantee the required measurement of the trailer, what information is required of me to find the appropriate measurement to buy Hubthe one included bearing and the other stuff. Thank you

asked by: JASIM

Expert Reply:

In order to pick out the correct hub assembly for a trailer you are going to need to know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.

Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.

If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.

You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.

expert reply by: Jameson C