Is the Aluminum Wheel # AM22318HWT Compatible with a 4 on 4 Hub that has a 2.5 Pilot Diameter
Question:
We have measured our hub on our trailer to be 2.5inch on a 4x4 wheel. I am looking at Item # AM22318HWT which has one at 2.8inch I just wanted to make sure that would not make any difference since the lug pattern is the same.
asked by: Chris C
Expert Reply:
As long as the bolt pattern on your hub is the same 4 on 4 inch bolt pattern that the Aluminum HWT Series S5 Trailer Wheel # AM22318HWT has then they will be compatible with each other. Since the pilot diameter is at 2.8 inches which is more than the 2.5 inches that your hub has it will fit and work just fine. This wheel has a load rating of 1,220 lbs.
I have also attached a review video for you to check out.
Product Page this Question was Asked From
Aluminum Split Spoke Trailer Wheel - 12" x 4" Rim - 4 on 4
- Trailer Tires and Wheels
- Wheel Only
- 12 Inch
- 4 on 4 Inch
- Aluminum Wheels
- Boat Trailer Wheels
- HWT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Metal Valve Stem that Can be Used with Aluminum Trailer Wheel
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Tire Sizing
- Q&A: Recommended 5.30-12 Tires With Load Rating Of D
- Q&A: Can ST145/R12 Trailer Tire & Wheel Replace 205/65-10 Trailer Tire & Wheel w/ 5 on 4-1/2 Bolt Pattern
- Q&A: Difference Between # AM90049 and # 12CLN-L Lug Nuts
- Q&A: Comparing Trailer Tire Sizes ST145/80R12 and 5.30-12
- Q&A: Can 4.80-12 Tire be Replaced with ST145/R12 Tire Using the Same Wheel
- Q&A: Do Trailer Wheel/Tire Setups Need to be Balanced
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Printable Trailer Bolt Hole Pattern Template