Correct Way of Distributing Weight of Cargo Carried in Trailer
Question:
I tow a double axle box trailer with equipment mounted inside. The weight distribution concerns me. Most of the weight is to the rear of the trailer. Should I be concerned? Is there legislation I need to be aware of?
asked by: Bobby
Expert Reply:
Ideally, the weight should be evenly distributed laterally with 60% of the weight in front of the axles, and 40% behind them. Too much weight in the rear can cause trailer sway, which if you haven't experienced it, can be very scary. I'm not aware of any specific legislation relating to this.
If you're experiencing sway problems, try moving some more of the cargo forward of the trailer axles. This should go a long way toward improving any sway you might be experiencing.
Product Page this Question was Asked From
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: What Exactly is Tongue Weight?
- Q&A: Best Tongue Weight Scale That's EASIEST To Use
- Article: Trailer Wiring Diagrams
- Q&A: Does Weight Distribution Lower Tongue Weight on Hitch of Tow Vehicle
- Q&A: What Does Underslung Coupler Look Like for Picking Out B and W Continuum Weight Distribution
- Q&A: Does the B&W Continuum Work w/ Trailers that Have 4 Inch Tall Frames?
- Q&A: Etrailer Tongue Weight Scale VS. Sherline Tongue Weight Scale
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Q&A: Margin of Error for the etrailer Trailer Tongue Weight Scale