What Bearing Buddy Will Fit Trailer Hub Assembly # 8-258BTUC1
Question:
I am purchasing the Dexter Trailer Hubs P/N 8-258BTUC1 from etrailer.com. Customer service told me that the size of the bore hub is 1.986 inches. Will the Bearing Buddy protectors 1980 fit without being too loose? They are .004 inches smaller than the bore hub. Will this be a correct fit or will I have a problem with the Bearing Buddies working loose and falling off?
asked by: Jack
Expert Reply:
I went out to the warehouse and did a test fit between the hub, # 8-258BTUC1, and Bearing Buddies, # BB1980A. The Bearing Buddies, though they are 6 thousandths of an inch smaller, will still fit tight in the hub bore. Bearing Buddies have to be driven in by putting something like a block of wood on the top and hitting the wood with a hammer. The wood disperses the energy from the hammer more evenly.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2047SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.047 Inch
- Bearing Buddy
more information >
Continue Researching
- Q&A: Recommended Replacement Tire for DK2 4x8 Folding Utility Trailer
- Q&A: What Size Bearing Buddies Will Fit a Harbor Freight Trailer 94564
- Q&A: Finding Grease Caps For A North Star Trailer - 2" Is Too Small. 2-1/16" Is Too Big.
- Q&A: Replacement Light Recommendation for Glo Brite 3rd Brake Light 9431-55-88
- Q&A: What is the Length of the 1.980" Bearing Buddy Bearing Protectors # BB1980A-SS
- Q&A: Recommended Bearing Buddy for 2 Inch Hub Bore
- Q&A: What Grease Should Be Used In Trailer Hub When Current Grease Complex Is Unknown
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Article: Most Popular Wheel Bearings
- Article: Trailer Maintenance Schedule
- Article: Trailer Jacks