Which Trailer Hub and Bearings Fit Spindle # TRU59FR
Question:
i have standard spindals that are 1 actual ODwhere act bearind fits. what bearins and hubs will fit this?
asked by: Charles
Expert Reply:
For spindle # TRU59FR, you can use hub # AKIHUB-440-2-1K. This hub comes with the proper bearings # L44643 inner and outer. The Cap has an outer diameter of 1.986 outer diameter and Seal # 34823.
The hub assembly is a 4 on 4 bolt pattern for 2,000 pound axles. You will want to make sure that the old bearings are stamped with L44643. If they have different numbers, let me know what they are and I can determine what the correct replacement hub is.
Products Referenced in This Question
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: How To Determine Blue Ox Spring Bar Weight Capacity
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: Replacement Master Cylinder And Shock For UFP A-60 / A-75 / XR-84 Surge Brake Actuators
- Article: Most Popular Wheel Bearings
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Replacement Boat Trailer Seal for a NOK AD2527E Grease Seal
- Q&A: How to Determine Hub and Spindle Size
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Stability Control for Heavy Duty Vehicles