Lug Nut Torque When Used with Trailer Hub part # AKIHUB-440-2-1K
Question:
I have this trailer hub on my tear trailer. I am going to repack the bearings, but dont know what the torque should be set at when putting the tire back on. Any suggestions? Thanks.
asked by: Bill
0
Expert Reply:
I attached a chart that shows all of the torque specs for lug nuts on a trailer wheel for you to check out. I don't know the wheel material on your trailer or the diameter but if it's steel/aluminum and the diameter of the wheel is between 8 inch and 14 inch in diameter the correct amount of torque is 75-85 ft since the studs are 1/2 inch in diameter.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Trailer Hubs, Wheels, And Tires For a Homemade Motorcycle Trailer
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Article: How to Measure a Trailer Axle
- Q&A: Replacement A-Frame Trailer Coupler For 1978 Airstream With 50 Degree A-Frame
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Maintenance Schedule