Availability of Rear Slipper Spring Hanger for 1-3/4 inch Wide Spring
Question:
What are the rear hangers that are used for the different 1.75 slipper leaf springs flat end, radius and hook I know you do not have 1.75 hook springs, but other stores do ? I know the rear hangers for the flat end springs are a ring type. Can these hangers be used for the radius and hook, or do these springs require a different rear hanger ? Thank you for all of your help and time.
asked by: John L
Expert Reply:
For a rear hanger designed for a 1-3/4 inch wide slipper spring we have the part # CE14017G.
This hanger can be used with the slipper springs that have a flat rear side or if they have a hook style.
Product Page this Question was Asked From
CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Snowmobile Trailer
- Slipper Springs - 1-3/4 Inch
- 1-3/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- CE Smith
more information >
Continue Researching
- Q&A: Replacement Axle And Leaf Springs For A 4' x 6' Single Axle Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Could Shackle Bolt # 166081 be Used with CE Smith Suspension Hanger # CE14016G
- Article: Where to Position the Trailer Axle?
- Q&A: How To Properly Measure Slipper Springs For Your Trailer's Leaf Sping Suspension
- Article: Trailer Wiring Diagrams
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Replacement Slipper Spring Recommendation to Replace 31 inch Long Spring
- Q&A: Can Slipper Spring # e29SR Install Below Trailer Axle
- Q&A: Parts Needed For Adding 1,000LB Slipper Springs To a Cart With No Suspension
- Q&A: Availability of Trailer Replacement Leaf Spring that is 30 inches Long for 1,800 lb Axle
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: How to Measure a Trailer Axle
- Article: How to Raise Your Travel Trailer Height