Recommendation on a Weight Distribution System for a Pop Up Trailer and a 2006 Dodge Durango
Question:
What size of aweight distribution hitch with sway control, should I buy for a Popup camping trailer? Dry Weight 3,221 lb Payload Capacity 1,217 lb GVWR 4,701 lb Hitch Weight 301 lb Towing vehicle 2006 Dodge Durango 5.7L 7,200 lb towing. Thanks!
asked by: Rick
Expert Reply:
When trying to decide on a proper weight distribution (WD) system for your towing rig, you will need to know the total tongue weight (TTW) of your set-up. The total tongue weight will be a fully loaded ready to tow trailer, plus any weight located behind the rear axle of your 2006 Dodge Durango. You want to use a system where your total tongue weight will fall in between the WD system's tongue weight range. I have attached an article that will explain how to find the TTW of your towing rig.
Once you have found your total tongue weight, you will be able to decided on the correct system for your towing application.
With the information that you provide I will be able to give you a general recommendation for a WD system. Since you are looking at a trailer that has a gross vehicle weight of 4,700 lbs, tongue weight is usually 10-15 percent of the total trailer weight. So, the tongue weight range of GVW will be 470 to 705 lbs. If you are going to be carrying cargo in the rear of your Durango, then that weight needs to be added to the tongue weight. As an example, lets say you have 100 lbs of cargo, then the tongue weight range ins now 570 to 805 lbs.
With this tongue weight range, I recommend the Reese Steadi-Flex Weight Distribution System w/ Sway Control, # RP66559. The Reese system has a tongue weight range of 500 to 1000 lbs. The systems uses an integrated sway-control that will limit side-to-side trailer movement.
I have attached two videos for your to review on the Reese Steadi-Flex WD system.
Product Page this Question was Asked From
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 10K GTW, 1K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 600 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Weight Distribution Recommendation for 6,000 lb Trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Quieter Weight Distribution System Recommendation for Trailer w Unloaded Tongue Weight of 490 lbs
- Q&A: Which System Is Best Between The Curt TruTrack & The Equal-i-zer Weight Distribution System?
- Q&A: Where to Mount Spring Bar Support Brackets on Curt TruTrack Weight Distribution System # C17499
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Weight Distribution Hitch With Sway Control for Jayco X20E
- Q&A: Will Curt Hitch Ball # A-6 Work on Reese Steadi-Flex Weight Distribution System RP66559
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Recommended Weight Distribution System for a 2,500 lbs Travel Trailer
- Article: Trailer Wiring Diagrams