Parts Needed to Flat Tow 2004 Jeep Liberty
Question:
i need to tow my 2004 jeep liberty behind my motor home . what harness di i need to install. the jeep already has a harness for towing a trailer. the motor home has a 7 pin connector. see attached photo
asked by: John V
Expert Reply:
For a lighting solution that will allow you to wire your 2004 Jeep Liberty's tail lights to accept your RV's signal lights, I recommend the Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit # RM-15247. This kit also has enough coiled wire to go directly from your Jeep to the 7-Way connector on the RV.
In order to flat tow your vehicle, you will also need base plates, a tow bar, safety cable set and a supplemental braking system.
Starting with the base plates, I recommend the Blue Ox Base Plate Kit # BX1119. This kit is confirmed to fit your Jeep Liberty and features removable bracket arms to provide a clean look when your vehicle is not being towed.
Then for a tow bar, I recommend the Blue Ox Alpha Tow Bar # BX7380. This tow bar is compatible with the Blue Ox Base Plates and has a weight capacity of 6,500 pounds. Safety cables are included with this particular tow bar.
For a supplemental braking system, I really like the Blue Ox Patriot Portable Braking System # BLU37TR. This is a great proportional system that will physically press down on the brake pedal in your Jeep at the same time and with the same intensity that you apply to it in your RV.
One final component that you may need is a high-low adapter. I have attached an article that will explain how to choose one for your system and a link that will take you to our available selection. I have also included video demonstrations on the products mentioned and an article on flat towing that you might find helpful.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Blue Ox Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Blue Ox
more information >
Blue Ox Alpha 2 Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,500 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6500 lbs
- Fits Blue Ox Base Plates
- Blue Ox
more information >
Product Page this Question was Asked From
Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: Brake-Lite Relay Kit For A 2021 Jeep Wrangler Sport
- Q&A: Wiring Required For Towing a 2007 Hummer H3 Behind a RV Motorhome
- Q&A: Is Lower Voltage Output Expected From RV Taillight Input
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: Recommended Flat Towing Components For A 2023 Ford Maverick 2.5 Hybrid
- Q&A: Recommended Plug and Play Flat Towing Wiring Harness for a 2020 Jeep Wrangler
- Q&A: Is The Hopkins Custom Tail Light Wiring Kit # HM87VR Compatible With LED Tail Lights?
- Q&A: Does 2022 Ford F-350 Super Duty Demco Classic Base Plate Kit Fit with Lower Front Air Dam
- Article: Flat Towing Package for 2014-2018 Jeep Grand Cherokee
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Article: Must-Have Flat Towing Components