Replacement Landing Gear for 1994 Shadow Cruiser 5th-Wheel Trailer
Question:
I HAVE A 1994 SHADOW CRUISER BUT THE LANDING JACKS HAVE BEEN REPLACED.THE JACK WITHOUT THE MOTOR IS STUCK . I HAVE THE JACK OUT BUT CANNT GET IT TO MOVE. I CANNT GET IT APART.THE CAP HAS THIS NUMBER VMC900L-417048 BUT NO MAKE OR MODEL. THE LEG IS 29-1/2inch LONG. IT IS A BOLT ON NOT WELDED THANK YOU FOR ANY HELP
asked by: KEN
Expert Reply:
I was unable to locate any information on your existing landing gear jacks using the number that you provided.
When replacing the jack, I recommend replacing both legs at the same time, as I don't recommend having legs from two different manufacturers on your system. To pick out landing gear that will bolt right up to your 1994 Shadow Cruiser, you will want to measure the distance between the mounting brackets (underside of the top bracket to the top of the lower bracket). I have included an image that more clearly shows these dimensions.
For example, the Reese Electric 5th Wheel Landing Gear Set # RP500708 has a mounting bracket measurement of 17-1/2 inches.
I have attached a link that will take you to our available selection of landing gear sets for you to look through.
