Troubleshooting Trailer Brakes On A Barrett Gooseneck Trailer
Question:
Should the wire for the brakes be live when unhooked to the brakes and show no current when hooked up to the brakes
asked by: Steve W
0
Expert Reply:
On your Barrett Gooseneck Trailer, if your brake magnet wires are not connected to the trailer brake wires, you will most likely be getting a current from the trailer breakaway battery on one of the two wires. You need to connect one of the wires to the magnet and one of them to ground to make the system function properly. Without the ground to complete the circuit there will be a draw from the magnet.
expert reply by:
Jason S
0
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Article: Trailer Wiring Diagrams
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Hanger Spacing When Using 23-1/8 Double-Eye Leaf Spring on Single Axle Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Trailer for Two Titan Propel 12 Kayaks
- Q&A: Replacement Brakes for a 5th Wheel Trailer with 5.2K Lippert Axles
- Q&A: Replacement Trailer Brake Assembly for B12EA-22 on 2018 Forest River 294BH Travel Trailer
- Q&A: Is Adhesive Tape Used When Installing WeatherTech Air Deflectors On 2015 Dodge Grand Caravan
- Article: Car Camping Checklist
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Choose the Right Trailer Hitch Class
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Flat Towing Package for 2008-2011 Honda CR-V