What Tools are Needed to Install Fulton Fold-Away Coupler Hinge Kit, # FHDPB330301
Question:
I am looking at the3X3 bolt on fold away hinge for the trailer of my 14 ft. lund boat. I would like to know what tools will be needed to install the part myself. Thanks
asked by: Jeff W
0
Expert Reply:
The tools needed to install the Fulton Fold-Away Coupler Hinge Kit, # FHDPB330301, are as follows.
1/2 inch drive ratchet
7/16 inch socket (for Torx bit)
Drill bits: 1/8, 1/4, 3/8, and 1/2
Safety glasses
Clamp
Jack stand
15/16 open end wrench and socket
Metal cutting saw
Torque wrench (capable of 80 foot pounds)
Gloves
Square
Wheel chocks
3/4 inch open end wrench and socket
1/2 inch chuck drill
Tape measure
Centerpunch
Hammer
expert reply by:
Michael H
0
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- Up to 48 Inch Long
- Bolt-On
- 5000 lbs GTW
- 3 x 3 Inch Tongue
- Fulton
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How to Select the Proper Length Safety Chains for a Trailer
- Article: Trailer Lighting Requirements
- Q&A: Are There Any Trailer Hitch Fits for a 2023 Ford Escape Plug-In Hybrid
- Q&A: Weight And Dimensions Of The Viair EVC Battery Powered Tire Inflator VA88JR
- Article: Trailer Wiring Diagrams
- Q&A: Can You Replace A GE Air Conditioner Be Replaced With An Advent A/C?
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Q&A: Does The etrailer Invisible Base Plate Kit # e86YR Need An Adapter For A Blue Ox Aventa II Tow Bar
- Article: Brake Controller Installation: Starting from Scratch
- Article: Best Boat Trailer Jacks
- Article: Trailer Tire Sizing
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Correct Replacement for Advent Analog Wall Thermostat ACTH1