Battery Charger for a Trailer Breakaway Kit Battery
Question:
I have a Trails West horse trailer that has a breakaway battery inside of the tack room. I want to connect a charging unit to that battery. It appears that all of your units come with a battery and box set up that is to be mounted on the trailer frame. Made for a trailer that presently does not have a breakaway battery system? Can you suggest a charging unit or system that could be connected to the existing breakaway battery ? If required, I could remove the existing battery and install a new unit but I would want it to be inside the tack room and not mounted to the outside frame. Any suggestions???? Thank you
asked by: David S
Expert Reply:
Generally a breakaway kit is installed mounting the battery to the frame but it doesn't have to be. We carry a few different chargers separate from the kits themselves and I've linked our selection for you.
The most popular of the chargers if the Hopkins # 20011. To install the Hopkins charger the black wire connects to the power coming from the vehicle battery, the red wire to the breakaway kit's battery, and the blue to the pin.
I've also linked a video for you.
Product Page this Question was Asked From
Trailer Breakaway Kit Battery Charger
- Accessories and Parts
- Trailer Breakaway Kit
- Battery Charger
- Hopkins
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Charging a Trailer Breakaway System Battery Using the 12 Volt Circuit on a 7-Way Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: Will the Hopkins Trailer Breakaway Battery Charger Work for an Auxiliary Battery on a Trailer
- Q&A: How Does the Hopkins Wiring Kit and The Tekonsha T-One Harness Install Together
- Q&A: How to Prevent Trailer Breakaway System Battery from Overcharging and Back Feeding Into Tow Vehicle
- Q&A: Comparing Tire Sizes ST185/80D13 and ST175/80R13 and Bias Ply/Radial Tire Construction
- Q&A: Installation Instructions For Hopkins Engager Trailer BreakAway Kit
- Q&A: Vampire Draw on Trailer Breakaway Kit Battery Charger
- Article: Testing Breakaway Systems
- Article: How to Choose the Right Trailer Hitch Class
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)