When Is It Necessary To Match The Correct Pilot Hole Size For Replacement Trailer Wheel
Question:
I need the pilot hole to be approximately 3.25 inches. You dont list that in your discription. Ive looked at other wheels/tires and the pilot hole where it fits on the hub varies in size.
asked by: J. L
Expert Reply:
The only time you have to match up the pilot hole is when your hub uses lug bolts, which then would use a hub-centric wheel. As long as your trailer hub uses lug nuts, the pilot hole will not effect mounting your wheel to the trailer hub because the lugs will center the wheel on the hub.
You will need to measure the bolt pattern of your trailer to determine the correct wheel you will need for your trailer (see FAQ). You will also want to choose a wheel with a larger pilot hole size than the hub.
I have linked an FAQ and video review on measuring bolt patterns that you may find as a good reference.
Product Page this Question was Asked From
Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 5.30-12
- 12 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Boat Trailer Wheels
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 530~12
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Can A Wheel With A Larger Pilot Hole Work As A Replacement For A Wheel With A Smaller Pilot Hole?
- Q&A: Tire and Wheel Recommendation for Small Boat Trailer with 5.30 x 12 tires on 4 Lug Wheels
- Q&A: Is There a Standard Wheel Pilot Hole Size
- Q&A: How to Measure Trailer Wheel Pilot Hole on 1997 Flagstaff Pop-Up to Determine Correct Grease Cap
- Q&A: How to Measure a Trailer Wheel Pilot Hole to Choose a Replacement Center Cap
- Q&A: Pilot Diameter Hole Dimension for 12 Inch Diameter Trailer Rims with a 5 on 4-1/2 inch Lug Pattern
- Shop: Trailer Hitch
- Shop: Curt Class II Euro Style Drawbar with 1-7/8" Ball - 6-5/8" Rise - 3,500 lbs
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Class II Drawbar - 3-1/8" Rise - 9-1/2" Long - 3,500 lbs
- Q&A: Recommended Euro Style Drawbar with 7 Rise
- Video: CE Smith Spare Tire Carrier CE27202 Review
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30620 Review