Mounting Hole Dimensions on B&W Pintle Hook Mounting Plate BWPMHD14004
Question:
BWPMHD14004 Looking at your previous recommendations as well as your video. Im more confused than ever. I see where your recording and measuring side to side bolt spacing of 3 3/8 and 3 1/2, which is it? Im not going to order on a chance these parts may fit together. Im needing a hitch that if I measure the bottom of my 2inch recievers hole is 19inch above the ground. I need the saddle of the pintle hitch to be close to 25. Im looking at the combo hitch with 2 5/16 ball or just the pintle. Any help would be greatly appreciated.
asked by: Jetred
Expert Reply:
The B&W Pintle Hook Mounting Plate for 2 Inch Hitches # BWPMHD14004 referenced in your question has mounting holes that measure 1-3/4 inches apart on center vertically, and 3-3/8 inches apart on center horizontally. I have attached an image to help clarify these dimensions.
The mounting plate is 12-1/4 inches tall and 5 inches wide and can be used in the drop or rise position in your 2 inch trailer hitch receiver.
For a pintle hook, I recommend looking at the Buyers Products Pintle Hook # 33710055. This hook includes a 2-5/16 inch hitch ball like what you are needing and has a 16,000 pound gross towing weight capacity. This is compatible with the mounting holes on the B&W Pintle Hook Mounting Plate and all the necessary hardware is included.
I have attached video demonstrations on both of these products for you to take a look at.
Products Referenced in This Question
Buyers Products 8 Ton Combination Hitch with Mounting Kit - 2-5/16" Ball - BH8 Series
- Pintle Hitch
- Pintle Hook - Ball Combo
- One Ball
- 16000 lbs GTW
- Bumper Mount
- Plate Mount
- 2-5/16 Inch Ball
- No Shank
- Buyers Products
more information >
Product Page this Question was Asked From
B&W Pintle Hook Mounting Plate for 2" Hitches - 13" Shank - 14 Hole - 16,000 lbs
- Pintle Hitch
- Pintle Mounting Plate
- 16000 lbs GTW
- 2 Inch Hitch Mount
- 14 Holes
- Standard Shank
- B and W
more information >
Continue Researching
- Q&A: Recommended Pintle Hook And Mount With 8 - 10 Inch Rise
- Q&A: Mounting Kit Recommendation for 60k Buyers Products Pintle Hook
- Q&A: What Size Lunette Ring Will the Buyers Products 30 Ton Pintle Hook Fit
- Article: Pintle-Hitches
- Q&A: Converting an M105A Military Trailer Air Over Hydraulic to Electric Over Hydraulic Drum Brakes
- Q&A: Comparing Curt Hitches # C15319 & # C15318 for 1995 Dodge Ram 3500 4WD Dually Diesel
- Q&A: Determining if B&W Mounting Plate # BWPMHD14005 Will Fit in Rise Position on Jeep Wrangler Unlimited
- Article: Trailer Wiring Diagrams
- Q&A: Pintle Hook Recommendation for 20K Curt Mounting Plate
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Performance Chips and Modules
- Article: How to Measure for Trailer Hitch Drop