Installing P3 Brake Controller On 2014 GMC Yukon With No Plug-In Port
Question:
I bought the optional wiring harness for the P3 for my 2014 Yukon. After plugging it in and connecting the controller, my vehicle will not start. Nothing lights up on the dash - just dead. When I unplug it the vehicle starts normally. Please help! Thanks.
asked by: Camper N
Helpful Expert Reply:
The 2014 GMC Yukon does not have an option for a plug-in adapter on a 2014 Yukon. They started offering the plug-in option on the 2015 models and newer.
I have attached a helpful article that explains in detail how you wire the brake controller to your vehicle. There are wires under the left side of the instrument panel to the left of the steering column you will need to use for the brake controller. You can use a circuit tester like part # PTW2993 to test the wires for function when installing the brake controller.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Trailer Lighting Requirements