What Is The Vaseline Looking Stuff In The OEM Plug And Connector?
Question:
When disconnecting the OEM plug on back of trailer connector to install Smart Hitch camera/sensor system, found what looked like Vaseline on OEM plug and connector. Will this interfere with proper connection?
asked by: Dennis M
0
Expert Reply:
What you found in the OEM plug and connector is not Vaseline, it is dielectric grease. It not only won't hurt the connector, it will help it. We use the Dielectric Grease for Electrical Connectors, 2 oz. # 11755 on the majority of our installs because it helps prevent electrical failures by keeping dirt, debris, and moisture that causes corrosion out of the connection.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Search Results: 17123
- Search Results: shanks
- Search Results: 92~00~0600
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Shop: Reese Weight Distribution Shank for 2" Hitches - 9 Hole Adjustment - 1,200 lb TW
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Shop: Curt Weight Distribution Shank for 2" Hitches - 3-1/8" Drop - 7-1/8" Rise
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 7-3/4" Rise, 5-1/4" Drop - 1.2K TW
- Shop: Curt Weight Distribution Shank - 12" Long - 7-1/2" or 7" Drop - 1,500 lbs TW
- Q&A: Does The Voyager WiSight 2.0 Camera System Have A USB Power Cord For The Monitor
- Video: Roadmaster 12 Volt Outlet Kit Installation - 2021 Jeep Gladiator
- Shop: Roof Rack
- Shop: RV Camera
- Shop: 12 Volt Outlet Kit, 20 amps
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Dielectric Grease Review
- Q&A: Why Would Brand New Trailer Brakes Feel Weak
- Q&A: Why Is Grease Used in Connection For Installing Trailer Wiring in 2013 Chevy Traverse
- Q&A: Voltage at Brake Magnets is 8 Volts with Brake Controller Set to Maximum
- Q&A: How To Attach A Ground Wire To Trailer Frame
- Q&A: Diagnosing, Locating and Repairing Trailer Ground Problem
- Q&A: How to Correct Weak Ground Connection on Vehicle and Trailer
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2022 Ford Maverick
- Video: Review of Tekonsha Custom Fit Vehicle Wiring - T-One Vehicle Wiring Harness 4-Pole Flat - TK53VR
- Shop: Trailer Wiring