Can 7 x 1-1/4 Inch Electric Brakes be Used with Drums for 7 x 1-3/4 Hydraulic Brakes
Question:
I am currently redoing my boat trailer and putting a wooden deck on it . I junked the boat. My question is that it currently has 7x 1 3/4 surge brakes on it . Will these electric brakes fit and function properly. I know the pad is smaller but Im only trying to make it inspectable and legal for the road. My truck is heavy enough that the reduced braking will not hurt me .
asked by: David C
Expert Reply:
Like you said the 7 x 1-1/4 inch electric brakes # AKEBRK-2 will work with reduced braking. But there is another thing to consider and that is that not all brake drums are compatible with both electric and hydraulic brakes. In most cases it is one or the other. It may indicate this on your brake drums.
If you determine that you need to replace the hub and drum assemblies let me know the bearing numbers stamped into the sides of the inner and outer bearings along with the bolt pattern of the wheels.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4
- Shop: Brake Controller
- Search Results: 20.5x8.0~10
- Shop: Trailer 4 on 4 Hub & Drum Assembly - 2,200 lbs. Axles - Hydraulic Brakes
- Video: CE Smith Spare Tire Carrier Padlock Brackets Review
- Video: CE Smith Spare Tire Carrier for Trailers Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3H410 Review
- Video: Dexter Electric Brake Assembly Review
- Video: Review of Kenda Tires and Wheels - Tire with Wheel - AM3H470
- Search Results: fstc1000301
- Search Results: 20.5x8x10
- Search Results: electric brake replacement
- Search Results: spare tire bracket
- Search Results: carlisle
- Shop: Trailer Wiring
- Shop: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,200-lb Axles - 4 on 4
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-2 Review
- Q&A: Replacement Brake Drum for a 1998 StarCraft 2408 Pop Up Trailer
- Video: Curt Trailer Connector Adapter Installation - 2020 Volvo XC60
- Search Results: 7 to 6 pin adapter
- Q&A: How to Make a 6-Way Square to 4-Way Flat Trailer Wiring Adapter
- Q&A: Brake Controller Recommendation and Install for 2020 Subaru Ascent
- Q&A: Availability of Replacement Master Cylinder for Atwood 85778 Actuator
- Q&A: Picking Out Replacement Axle for 2005 Coachman Clipper
David
5/3/2020
Hi,Did you ever figure out if your drums worked?Im doing the exact same thing and ordered this electric brake kit. I intend to use my same drums I could NOT find any electric brakes for 7 x 1 3/4 and am not sure they will fit.