Lighting Converter for Motorcycle Towing 4-Pole Trailer
Question:
I have a Pollak 5 pin round connector on my motorcycle and am looking for an adapter to a 4 way flat connector on my trailer. Do you have such a product?
asked by: Keith
Helpful Expert Reply:
We do not have any trailer wiring adapter that converts the 5-pin round format on your motorcycle to a 4-pole flat type. The reason is that your motorcycle uses separate stop and turn lights while the 4-pole trailer lighting format combines these into a left stop/turn and right stop/turn circuit.
You have two options: adding separate turn lights to the trailer OR installing a converter that takes in the bike's separate signals and combines them into the trailer 4-pole format. Roadmaster part # RM-732 takes in the separate signals from the motorcycle and combines the stop/turn circuits at its output.
At the converter's output side you will need to splice in a vehicle-side 4-pole connector # C58044 to match your trailer. Mount the converter in a safe protected spot on the vehicle and carefully wrap all splices with electrical tape. Note that your running light wire on the bike bypasses this converter completely; it connects directly to the 4-pole's brown wire.
Products Referenced in This Question
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 5 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Roadmaster Brite-Lite Wiring Converter
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Tail Light Converter
- Universal
- Roadmaster
more information >
Product Page this Question was Asked From
Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- Plug Only
- 5 Round
- Pollak
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Arms for Roadmaster EZ5 Base Plate Kit for 2015 Honda Fit
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Q&A: Replacement Fulton Winch Strap Measuring 1-7/8 Inches by 14 Feet Long
- Q&A: Replacement for Atwood 70254 RV Landing Gear Switch
- Article: How to Charge RV Batteries
- Q&A: Replacement For Lippert Slam Latch 642063 On a 2019 Grand Design Solitude 3740BH-R
- Article: What is an RV-Approved Bike Rack? (And Do You REALLY Need One?)
- Q&A: Where to Find VIN/Serial Number on Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Q&A: Does The DeeMaxx Disc Brake Kit # DE82FR Include Both Brakes For One Axle?
- Article: RV Cell Boosters, How Do They Work?
- Article: Roof Rack Information
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)