Location of Stop Light Switch Wire on 2017 Chevrolet Equinox

Question:

hi...I have to install your ETBC7 kit for electric trailer brakes...everything is good...but I need the location for the brake stop signal on my 2017 Chevrolet equinox...thanks

asked by: Peter H

Expert Reply:

The 2017 Chevrolet Equinox has a brake pedal sensor which makes it difficult to locate and use the stop light switch to install our # ETBC7 kit. You'll need to access the BCM (body control module) under the dash which will likely be near the driver's left knee. You'll want to use a circuit tester like # 3808 to confirm you have the correct wire that only shows power when the brake pedal is pressed.

Another option is to create your own stop light switch using # RM-751439. The kit is normally used when flat towing the Equinox but can be used with a brake controller. You'll be bypassing the vehicle's stop light switch so the brake lights will not light up when using just the manual override lever of the brake controller.

expert reply by: Charles S