Can Center Bolt Be Ran from the Bottom Up on Trailer Leaf Spring # SP-113275
Question:
Can the center bolt that holds the 3 leaf springs together be turned over? The current leaf springs on my trailer have the bolt threaded up from the bottom in order to fit on the trailer axle.
asked by: Seth P
Expert Reply:
Yes, if you look closely at some of the pictures you can see the center bolt for leaf spring # SP-113275 goes through the stack and into a nut on the bottom. So in other words it can be reversed. Please note it would be a good idea to secure the spring using vises or clamps in order to keep the spring stack in position and so no residual tension can cause a leaf to possibly cause an injury. Do not work on springs when they are under load (still on the trailer).
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 23-1/2 Inch Long
- Painted
- Universal Group
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacing 6-Leaf Springs On A Tandem Axle Trailer With Lower Rated Springs
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Q&A: 25-1/4 Inch or 26 Inch 4,000 lb Double-Eye Spring For Trailer With 25-1/2 Inch Eye Spacing
- Q&A: Can Trailer Axle Leaf Spring e22YR Install on Overslung and Underslung Axle
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: Review of EVO Formance Vehicle Lights - Blue LED Accent Light - CM93317
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Search Results: slipper springs
- Video: Alpena Vehicle Lights - Accent Light - ALP77426 Review
- Video: etrailer Radius End 4-Leaf Slipper Spring Installation
- Q&A: What is The Difference Between Having Trailer Axles Above or Below the Leaf Springs
- Search Results: morryde alltrek 4000
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Q&A: Availability Of A 25/75" Long Lead Spring With A 2,500 lb Capacity
- Video: Review of Yakima Replacement SkyBox SuperLatch Handles - Y8880348
- Search Results: trailer tires
- Search Results: boat deck light
- Search Results: slip spring
- Q&A: How to Increase the Clearance Between the Truck Bed Rails and the Bottom of a 5th Wheel Trailer
- Q&A: Spindle Dimensions of a 3500 lb Axle
- Video: Review of etrailer Trailer Leaf Spring Suspension - 3 Leaf Slipper Radius End 1500 lb Axle - e99SR
- Video: TruRyde Double Lip Grease Seals Review
- Search Results: am20768
- Search Results: rim clamps