Replacement Hub and Drums and Brake Assemblies for 2004 Fleetwood Yuma Camper
Question:
Hi, I have a dexter ez lube hub that I would like to replace. I see two numbers stamped on the hub: WF34818 8257 This is a 5 lug nut hub. I would also like to replace the brake assembly a 4 bolt for this as well. Both items are for a 2004 Fleetwood Yuma pop-up camper. Can you provide me with some details for replacement parts? Thanks
asked by: Joe C
Expert Reply:
Your 8257 hubs are # 8-257-5UC3-EZ. If you'd like to verify these check your bearing numbers. They should be # L44649 for both inner and outer.
The hub and drum assembly is a 5 on 4-1/2 bolt pattern for 2,000 pound axles. It includes the bearings, races, seal, grease cap, wheel bolts and lug nuts.
For replacement brakes use # AKEBRK-2. This includes both left and right hand side brake assemblies. They're marked as such because they are side specific.
Products Referenced in This Question
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Replacement Shoe and Lining for 7" Electric Brake Assemblies - 2,000 lbs
- Video: etrailer Trailer Brakes AKBRKR-S-7 Review
- Shop: Brake Controller
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Q&A: Typical Trailer Lug Nut Diameter and Thread Pitch
- Shop: Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Shop: Curt Spectrum Trailer Brake Controller - Dash Mounted Knob - 1 to 4 Axles - Proportional
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Video: etrailer Trailer Brakes AKBRKR-M7 Review
- Q&A: How Long Do My Lug Studs Need to be on Dexter 2200-lbs Axles
- Q&A: Wheel Stud that is Longer Than K12WB2 with Same Diameter
- Q&A: Which Wheels Fit On Dexter Trailer Hub Assembly, # 8-213-5UC1
- Q&A: Can You Use A 1/2 Wheel Stud On A Hub That Uses 9/16 Wheel Studs?
- Q&A: Replacement Wheel Studs with 2-1/2 Inch Length and .54 Inch Knurl Diameter
- Video: etrailer Electric Trailer Brake Magnet Kit Replacement Review
- Video: Dexter Electric Trailer Brake Kit Installation
- Search Results: coleman~fleetwood
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-257-5UC3-EZ Review
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Search Results: trailer hub studs
- Search Results: l44610
- Search Results: 12" stud
- Search Results: electric brake magnet clip
- Search Results: 10~9 seal
- Search Results: cotter pin
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84557UC3-EZ Review
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-2-EZ-2K Review