Hub/Drum Recommendation with 8 on 6.5 Bolt Pattern for Use with Timbren Axle Less ASR35HDS02
Question:
I see various answers for parts of my questions but not the entire question. I am ordering the Timbren ASR35HDS02 4inch lift with long spindles and want to also order ALL the parts needed to add brakes with a 8 on 6.5inch lug pattern to match my 3/4 ton Silverado. I am ordering 2 sets of Timbrens for my dual axle trailer therefore I need 4 brakes, hubs, drums and the parts to attach them to the Timbrens. I prefer the EZ Lube hubs. What parts and quantities I ask because it seems some parts are in pairs and others are single will I need? Thanks
asked by: David P
Expert Reply:
For a hub/drum that fits the Timbren Kit part # ASR35HDS02 and will give you an 8 on 6-1/2 inch bolt pattern we have the part # 8-219-4UC3-EZ which will work well. These are sold individually so you need a quantity of 4 of these. These are EZ lube hubs.
For brake assemblies you need 2 of the # AKEBRK-7R-SA for the right hand side and 2 of the # AKEBRK-7L-SA for the left hand side.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Tire Sizing
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Q&A: Can Trailer 4-Way be Ran to Trailer with 8 Wires for Trailer Wiring
- Q&A: Using Passenger Car Tires on Trailers
- Q&A: Replacement For Fulton Drop-Leg Stabilizer Jack
- Q&A: Hubs with 5 on 5 Bolt Pattern that Will Fit a Timbren Axle-Less Suspension System
- Article: Best RV Roof Vents
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height