What is the Diameter of Hub/Drum 84546UC3 for a Wheel Center Pilot Hole
Question:
What is the center hub diameter? I have heard it is 3.11. I want the wheels on my camper to fit prior to ordering these as replacements.
asked by: Adam
0
Expert Reply:
The center hub diameter for assembly # 84546UC3 is actually 2.60 inches (measured with digital calipers). On trailer wheels the center pilot hole of the wheel can be larger if the wheel is held on with lug nuts instead of the exact match for the hub.
Wheels that use wheel bolts instead of lug nuts do need to match because that is how the wheel centers on the hub.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Replacement Trailer Brakes For a AL-KO Hub/Drum 8490
- Q&A: Recommended Replacement Hub and Drum Assembly Kit for a UFP HD-1377-10 Hub and Drum
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Replacement Grease Seal for Timken 171255
- Q&A: Needing Replacement Grease Seals for Part # TCM 171255VB
- Q&A: Replacement Dexter Brake Assemblies for 36-19 Assemblies
- Q&A: When Will The Furrion Chill Cube RV Air Conditioner Be Aftermarket Available