Best Weight Distribution System Recommendation for Trailer that Weighs 9,900 lbs
Question:
Purchasing a work and play 27ULPS. What would be the best weight distribution hitch and sway bar system for this model. Approx. Weight: 6929 Lbs Approx. Gvwr: 9984 Lbs Will be pulling with a 06 GMC 2500hd with 6.6 duramax
asked by: D.J.
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
For a loaded trailer weight of 9,900 lbs the tongue weight would be between 990 lbs and 1,485 lbs. The Strait Line part # RP66130 would be a great option for you as it has a tongue weight range of 800-1,500 lbs and has the only sway control on the market that works to fight sway before it starts.
You'll also need the shank part # RP54970 and hitch ball part # C40030.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 15,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 15000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Is There a Trailer End 4-Round With Wires
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Tongue Weight Capacity for a 2020 Chevrolet Silverado 2500
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will 18" Long Equal-i-zer Weight Dist Shank Reduce Tongue Weight Capacity
- Q&A: 2-5/16 Inch Ball for Reese SC Weight Distribution System # RP66131
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: Will Lift Bracket RP6637 and Chains 3216 Fit on Pro Series RB3 Weight Distribution System