Does Bulldog 12.5K Square Trailer Jack Have to be Welded On
Question:
I have a 1992 aluminum Sooner 3 horse slant gooseneck trailer. The original jack has stopped lifting when you turn the crank handle, the gears are stripped. So I would like to replace the original jack with the Bulldog jack. However my original jack is bolted on, not welded. Is there a way to bolt on the Bulldog Jack or do I have to try and weld to the aluminum of my trailer? Thank you for your help.
asked by: Andrea K
Expert Reply:
One option would be to weld a bracket to Bulldog jack # BD182700 and then bolt the whole thing to the trailer. That way you are not welding steel to aluminum. Otherwise, if you choose to go with welding the jack straight to the trailer frame I recommend having a professional welder do it because welding to aluminum is tricky and takes experience.
If you weld a steel bracket to the steel jack tube the bracket would have to be fabricated since there isn't a bracket made for this purpose.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Product Page this Question was Asked From
Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 12,500 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Fifth Wheel Trailer
- Gooseneck Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 10001 lbs or More
- Sidewind Jack
- 26 Inch Lift
- Weld-On
- With Rectangle Foot
- Bulldog
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Performance Chips and Modules
- Shop: Pro Series Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs
- Shop: Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs
- Shop: Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 25-3/4" Lift - 10K
- Shop: Performance Chip Tuners
- Shop: Floor Mats
- Shop: Trim Kits
- Shop: Adco SFS AquaShed Trailer Cover for Gooseneck Horse Trailers up to 28-1/2' Long - Gray
- Search Results: trailer covers
- Search Results: horse trailer covers
- Shop: Edge Insight CS2 Comprehensive Gauge Display - Color Screen
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer jack
- Search Results: gooseneck hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: hitch
- Shop: Suspension Enhancement
- Article: Rooftop Cargo Carriers
- Shop: Pro Series Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 10,000 lbs
- Shop: Brake Controller
- Search Results: brake controller
- Article: Stability Control for Heavy Duty Vehicles
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Most Popular Wheel Bearings
- Q&A: Installing a Brake Controller on a 2017 Chrysler Pacifica with Start/Stop Technology