Availability of Idler Hub Assembly with Threaded Bolt Holes
Question:
I need 2 idler hubs for my boat trailer and I need them with female threaded holes for the wheel lug bolts. I dont see that type. Are the hub studs removable? Thanks
asked by: Steve P
Expert Reply:
We do have a few idler hub assemblies with threaded lug bolt holes currently available, such as the Redline Complete Agricultural Hub Assembly # AH30660FCOMP. This hub has a 6 on 6 bolt pattern and will fit Spindle # TRU34FR. It has an inner bearing # 29749 and outer bearing # LM67048.
The Dexter Trailer Hub Assembly # 42660UC1 also has a 6 on 6 bolt pattern but has an inner bearing # 25580 and outer bearing # LM67048
The CE Smith Trailer Hub Assembly # CE13100 is pre-greased and has a 4 on 4 bolt pattern. The # L44643 inner and outer bearings are included.
In order to determine the correct hub for your trailer, you will first need to find the wheel bolt pattern. I have attached a helpful article on how to measure this. Next you will want to make sure the bearing numbers match up to your existing unit to ensure it will fit onto the axle and spindle. The numbers should be stamped onto the bearings themselves.
I have attached a link that will take you to our available selection of idler hubs.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.500 Inch I.D.
- Bearing 29749
- Race 29710
- 3000 lbs Axle
- etrailer
more information >
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 6 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- 25580
- LM67048
- For 6000 lbs Axles
- 9/16 Inch Stud
- 6 on 6 Inch
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Agricultural Spindle for 3,000-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Agricultural Spindle
- 1-3/4 Inch Diameter
- Round
- For 3000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Complete Agricultural Hub Assembly for Spindle # AS3000F
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM29749
- LM67048
- For 3000 lbs Axles
- 1/2 Inch Stud
- 6 on 6 Inch
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: The Differences Between Cam Buckles and Ratchet Straps (And Who Would Win In a Fight)
- Article: Trailer Tire Sizing
- Q&A: What Flexair 5th Wheel Pin Box Fits My 2021 Grand Design Reflection 337RLS?
- Q&A: Would Dexter 6k Hub Fit on 7k Dexter Trailer Axle
- Q&A: Info Needed to Pick Out Replacement Hub for Older Trailer
- Q&A: Replacement Agricultural Hub Assembly for 6 on 6 Inch Bolt Pattern
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Measuring a Trailer Tire
- Q&A: Agricultural Hub Replacement with 6 on 6 inch Bolt Pattern and Bearings LM67048 and 25580
- Q&A: Choosing Correct Replacement Hub and Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Where do the Wires of a Trailer Break Away System Install Onto
- Article: Trailer Hitch Receiver Sizes