Measurements Of Trailer Valet 5X Swivel Jack And Trailer Mover

Question:

Im considering purchase of a Trailer Valet 5X. Do you have any more detailed dimensional drawings? At a minimum, Im interested in the following: 1. With the jack fully retracted, what is the distance from the mounting bracket pivot point to the end of the jack tube? And from the pivot point to the far end of the tires? 2. Website shows a width of 18.5, but doesnt say from where to where. What is the distance from the face of the trailer frame measured perpendicular to the frame to the far side of the wheel axle? 3. On the mounting bracket, what is the vertical distance from the center of the pivot point to each end of the bracket plate? 4. When the jack tube is stowed in the horizontal position, what is the vertical distance from the center of the pivot point to the lowest hanging part of the assembly? Thanks for any help you can give me.

asked by: Dave S

Expert Reply:

The Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 500 lbs # STC-V211 doesn't have detailed dimensional drawings, so I went out to the warehouse to take some measurements for you.
1. The distance from the mounting bracket pivot point to the end of the jack is 8 inches and with the wheels is 14 inches. From the top of the jack to the bottom of the jack is 16 inches and from the top of the jack to the bottom of the wheels are 27 inches.
2. From the face of the trailer frame to the far side of the wheel axle is 10 inches. From the frame to the end of the pipe mount when the unit is removed is 5 inches.
3. The vertical distance from the pivot point to the end of the bracket is 6-1/4 inches in one direction and 1-1/2 inches in the other direction. To the furthest mounting hole from the pivot point is 5-1/2 inches to hole center and 3/4 of an inch to hole center.
4. When the jack is stowed the measurement from the center of the pivot point to the lowest hanging part of the assembly is 13 inches. From the top of the bracket to the lowest point is about 16 inches.

expert reply by: Jason S