Spring Spring Hanger Spacing for Spring e46SR
Question:
I have part # e46SR and ap202-h238. If i start with the center hanger at its center point. What is the measurement to the center point of the other two hangers. Center to hitch and center to rear. Thanks
asked by: Mike D
Helpful Expert Reply:
The B dimension on a slipper spring is the distance that should be between the hanger and the mounting point on a slipper spring equalizer.
For example the part # e46SR that you referenced should have a distance of 24-7/8 inches between the first hanger and the equalizer mounting point.
Since equalizers can have different lengths there isn't a standard dimension with this spring.
Let's use hanger kit part # AP202-H238 as an example.
The first hanger of the hanger kit part # AP202-H238 will need to be 29-1/2 inches from the center hanger, the rear hanger will then need to be 29-7/8 inches from the rear hanger to install the Slipper Spring kit part # SP-161275
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Redline
more information >
Product Page this Question was Asked From
1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 6000 lbs
- 1-3/4 Inch Wide
- 1 Leaf
- 25-1/4 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Article: Slipper Spring Trailer Suspension System Review
- Video: Redline Trailer Suspension - Leaf Spring Suspension - H238 Review
- Shop: Tandem-Axle Trailer Hangers for 2" Slipper Springs - 5" Front, 6-3/8" Rear
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: 6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 29-1/2" Long
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Search Results: h238
- Video: Review of Dexter Trailer Leaf Spring Suspension - Hangers - Suspension Kits - AP202-H202
- Shop: Center Hanger for 2" Wide Slipper Springs - 4-1/2" Tall - 7/8" Bolt Hole
- Shop: Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Search Results: trailer light box
- Search Results: springs
- Search Results: tail light mount
- Search Results: equalizers
- Search Results: hangers
- Search Results: tail light housing
- Q&A: Leaf Spring Replacements Compatible With 10K Trailer With Dual Axles
- Q&A: How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
- Q&A: Spring Hanger Spacing Dimensions for a Tandem Axle Slipper Spring Suspension on a 14,0000 lb Trailer
- Q&A: Do Suspension Hangers Need to Welded on Or Can They be Bolted On
- Video: Review of etrailer 2 Leaf Slipper Spring - e36SR
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 13-4 Review
- Q&A: Trailer Slipper Spring to Replace Dexter 072-032-00 Spring
- Q&A: Can Radius End Leaf Spring Be Used to Replace Flat End Leaf Spring
- Q&A: What Torque is Needed for Bolts on Equalizer for 2" Wide Slipper Springs