Troubleshooting Wiring Issues On Utility Trailer
Question:
IOn the right side have tied green to green brown to brown on the left side yellow to yellow and brown to brown. I have grounded each trailer white to each side of trailer. All this is looking at the trailer from the rear towards the front. No lights????
asked by: Larry
Expert Reply:
Since you are having issues when all the colors seem accurate, I recommend connecting by using the function. For this you will need a circuit tester like # PTW2993. This will allow you to check each function on your vehicle, and then check each function on your trailer to match functions. This will also allow you to check wires for a short along the way so you can replace broken wires. I've attached a couple articles to assist.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)