Availability of Trailer Axle that is 60 inches Hub to Hub and 48 inches From Spring Seat to Seat
Question:
Do you carry a 60 -48 spring seat axle that isnt cambered? Just looking for a straight axle.
asked by: Mike
0
Expert Reply:
All trailer axles are going to have the bow in them that you are referring to. This is so that when the weight of the trailer is put on them they flex slightly and then the axle ends up being flat. Without the bow in them the alignment of your wheels/tires would be off.
The part # 20545I-ST-60-15 matches your dimension specs and has a 2,000 lbs capacity. It would be the best option we have.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Recommended Parts for Rebuild/Upgrade of Harbor Freight Trailer
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Q&A: Do Dexter Axles With 86-1/2 Inch Hub Face Have 71-1/2 Inch Spring Centers
- Q&A: Upgrading Trailer Tires and Wheels For Highway use on Harbor Freight 4x8 Folding Trailer
- Q&A: Will Kodiak Wheel Bolt # K12WB169 Fit if There are Small Differences in Size
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement Axle for Harbor Freight Folding Trailer 62671
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Measuring a Trailer Tire
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Raise Your Travel Trailer Height
- Article: Double-Eye Trailer Suspension System Review
- Article: 7 Common Questions Everyone Has About Trailer Tires