How To Reset Edge EvoHT2 Hand-Held Performance Tuner
Question:
how do I reset this product?
asked by: Romeo E
Expert Reply:
I checked out the installation instructions for the EvoHT2 Tuner, part # EP36040 and found that on page 18 it is explained how to return the engine tuning to stock.
From the main menu you will need to select 'Tune Vehicle'. Then select 'Quick Tune'. Then turn the ignition on but do not start the engine. You then press enter. Next, you select 'Stock' from the Tune Vehicle screen. When it asks if you wish to return the vehicle to stock you select Yes. Then turn the ignition switch off and remove the key, and press enter. At this point the vehicle has been returned to the stock setting.
I have attached a copy of page 18 of the instructions you can check out.
Product Page this Question was Asked From
Edge EvoHT2 Hand-Held Performance Tuner - Dodge/Ram - Gas/Diesel
- Performance Chip
- Performance Tuners
- Tuner Only
- Color Screen
- No - Not California Approved
- EvoHT2
- Edge
more information >
Continue Researching
- Q&A: Can an Edge Programmer be Reset if it is Installed on a Vehicle
- Article: Performance Chips and Modules
- Article: Best Bike Racks for Electric Bikes
- Q&A: Can I Adjust My Shift Points Using The Superchips Flashpaq F5 Performance Tuner On My 2014 Ram 1500?
- Q&A: Replacement Tuner For 2004 Dodge Ram 1500 With 5.7 HEMI
- Q&A: How to Add Furrion Vision S Camera System on Trailer with OEM Camera Mounting Bracket
- Q&A: What Does the Tow Haul Button Do On a 2013 Dodge Durango
- Q&A: Can Multi-Displacement System On 2005 Chrysler 300C be Turned Off With Superchips Tuner
- Q&A: How Much Power Does SuperChips Programmer Give 2012 Dodge Ram 1500 with 5.7 liter Hemi
Ed
7/30/2020
He didn't ask how to set vehicle back to stock. He asked how to fresh the tuner back to stock, including passwords etc. Duh.