Recommended Trailer Hitch For 2004 Ford Escape
Question:
Hello, I am looking for a Class I frame rail mount style for my 2004 Ford Escape. Do you carry such an item? Regards
asked by: Matt
Expert Reply:
The Class l trailer hitch that is designed to fit your 2004 Escape is part # C11106. This is a Class l and it has a 1-1/4 inch receiver opening. There is some drilling required when installing this hitch. You will need to drill into the trunk area at the rear of your Escape to install this hitch.
The trailer hitch I recommend for your 2004 Ford Escape is the Draw-Tite Max Frame, part # 75118. This is a Class lll hitch and it has a 2-inch receiver opening. This hitch requires no drilling or welding as it installs in the existing holes of your vehicle frame.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
If you need trailer wiring and your Escape does not have the factory tow package, I recommend part # 46255. To be able to identity the wiring on your Escape I recommend using a circuit tester like part # PTW2993.
If you have the tow package on your Escape, I recommend part # C55255. This simply plugs into the harness located behind the driver side interior trim panel in the rear cargo area of your Escape.
Products Referenced in This Question
Hopkins Active Tail Light Converter with Install Kit
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug and Lead
- 4 Flat
- Hopkins
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >