Bushing for Reducing Hitch Ball Hole from 1-1/4 Inch to 1 Inch
Question:
My mounting platform thickness is about 11/16. Which bushing would be best for my installation? Thanks
asked by: Ron P
0
Expert Reply:
The bushing that's as close to 11/16 inches that we have is # F-2. This reduces the hole diameter from 1-1/4 inches to 1 inch and is 3/4 inches tall. So it's only 1/16 inches taller than your ball mount's platform.
expert reply by:
Charles S
0
Product Page this Question was Asked From
Hitch Ball Bushing - 1-1/4" to 1" - Zinc
- Accessories and Parts
- Trailer Hitch Ball
- Bushing
- 1-1/4 Inch to 1 Inch
- CURT
more information >
Continue Researching
- Q&A: Bushing and Bolt For Equalizer 13-140-3 Rear Spring Attachment
- Q&A: Pollak 7-Way # PK11893-11932 Wiring Diagram
- Article: Most Popular Wheel Bearings
- Q&A: Wiring in a Trailer Brake Controller on a 2013 Chevy Suburban 1500
- Q&A: How to Determine the Capacity of Trailer Leaf Springs and How to Raise the Coupler Height
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Availability of Convert-A-Ball Interchangeable Trailer Hitch Ball w/ 1-1/4 Inch Diameter Shank
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Hitch Pin Recommendation that Long Enough to Be Used on Chevy 2500HD With 2-1/2 in Hitch
- Q&A: Does The Edge Pulsar V3 L5P Inline Tuner Void The Factory Warranty on a 2020-2022 L5P Duramax?
- Article: Determining Trailer Tongue Weight
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Which Hitches are Made in the USA