Parts Needed to Flat Tow 2006 Jeep Wrangler with Roadmaster Tow Bar
Question:
I have a Roadmaster All Terran tow bar and I need to hook up a new 2006 TJ jeep, what product do I need for the Jeep?
asked by: Don S
Expert Reply:
You will need a base plate kit part # RM-521424-4 which is confirmed as a fit for your 2006 Jeep Wrangler.
For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Installation Time To Install the Tekonsha Vehicle Wiring Harness # TK69FR on 2021 Toyota Sienna
- Q&A: Can a Jeep Wrangler be Flat Towed by the Front Bumper
- Q&A: Recommended Replacement For A Parallax 7345 Power Center
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Q&A: 1997 Jeep Wrangler Flat Towing Parts Recommendation
- Q&A: Best Parts to Flat Tow a Jeep Wrangler TJ with D-Ring Adapters
- Q&A: Finding the Serial Number on a Roadmaster Sterling Tow Bar to Use Adapter for Blue Ox base Plates
- Article: Trailer Wiring Diagrams
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Q&A: Recommended Equipment for Flat Towing 2007 Saturn Vue Behind a Motorhome
- Article: How to Choose a High-Low Adapter
- Article: Best Vehicles to Flat Tow Behind an RV