bing tracking image
Q & A Icon

Parts Needed to Flat Tow 2010 Ford F-150 with Roadmaster Sterling  

Question:

Wanting to purchase the sterling all terrain tow bar 8000 lb. capacity, towing a 2010 ford f150 super crew with remco transmision pump, what base plate is recommended looking for a nice clean look when not towing truck weighs about 6000 lbs. Thanks for your time.

0

Expert Reply:

You would wan the Roadmaster Base Plate kit part # 495-1A. This is a confirmed fit for your 2010 Ford F-150 and would work well with the Sterling # RM-576.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
0
Jameson C

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>