Recommended 5th Wheel Hitch And Trailer Adjustment Options For 2016 Ram 3500-6Ft Bed Factory Rails
Question:
I have a 2016 Ram 3500 SRW with a bed height of approx 47inch and the top of the tailgate is 60. The 5th wheel I want to get has a pin height of 49.5inch and the bottom of the front cap is 63.5. Can I make that work? All the hitches I see are about 12-17inch tall. That would put me nose up about 10, right?
asked by: Adam
Expert Reply:
For your 2016 Ram 3500, I recommend the Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000 lbs, # C16541 along with the Adapter Rails for Curt 5th Wheel Hitch w/ Slider - Ram Towing Prep Package # C16022. I've linked a video of this hitch and adapter rail kit. This hitch is adjustable from 17-1/2 - 21-1/2 inches. This will give you adjustability to ensure you won't hit the bed or tailgate of your truck.
There will also be adjustability on your pin box on the trailer you are looking at. This will allow you to make sure you get the best towing height combination to keep the trailer as level as possible. If you are nose up, you can look at installing taller spring hangers on your trailer or use an over-under axle kit that is axle capacity specific like # K71-385-00. With the truck and trailer on level ground you would want at least 4 to 6 inches of clearance between the tops of the bed sides and the bottom of the trailer overhang. If you can get that by adjusting a hitch and the pin box on the trailer then that is what you are aiming for.
Products Referenced in This Question
Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 5000 lbs Vertical Load
- 20000 lbs GTW
- Cushioned Double Pivot
- Standard - Double Jaw
- 17-1/2 - 21-1/2 Inch Tall
- 12 Inch Fore/Aft Travel
- CURT
more information >
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Product Page this Question was Asked From
Adapter Rails for Curt 5th Wheel Hitch w/ Slider - Ram Towing Prep Package
- Accessories and Parts
- Fifth Wheel Installation Kit
- Adapters
- Rail Adapter
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will The Curt Crosswing Fit a 2016 Ram 2500 Short Bed With Factory Puck System
- Article: Ram Trailer Tow Prep Package
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Q&A: Do Rear TorkLift Tie-Downs Need to be Different with TorkLift SuperHitch Installed on a Ram 2500
- Q&A: Will The Curt 5TH Wheel Adapter Rails Allow For Draw-Tite 15K Hitch On 2019 F-250 With Factory Prep
- Q&A: 2019 Ram 2500 OEM Puck System Adapter for RBW Lil' Rocker 5th Wheel Hitch
- Q&A: 5TH Wheel Hitch For 2019 Ram 2500 Short Bed With Gooseneck Ball Installed
- Q&A: Difference Between The C16022 And C29BR Fifth Wheel Adapters
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: Trailer Tire Sizing