Needing Replacement Brake Drums With 5/8 Inch Wheel Studs on 8,000 Lbs Axles
Question:
I need a drum hub that has 5/8 studs. Im currently running grease.
asked by: Alvaro P
Expert Reply:
The brake drums that we carry for the 8,000 lbs axles come in two types, grease or oil bath style. The drums that have the 5/8 inch wheel studs, like # 8-285-10UC3-A, are for the oil bath style drums.The grease lubed drums, like # AKHD-865-8-K, are using 9/16 inch wheel studs.
If you have the 5/8 inch studs, then you will need # 8-285-10UC3-A. The drums will come with new lug nuts, bearings, and seals. The only difference is these drums are designed to use oil instead of grease.
You will need to know the bearing and seal numbers to make sure to find the correct drums you will need. If you have grease drums the stud size should be 9/16 of an inch. However, someone may have custom-fit a set of drums, bearings, and seals or changed out he wheel studs on the drums.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 8,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 25580
- 02475
- For 8000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 02475
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Trailer Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Trailer Hitch
- Search Results: 25580
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Trailer Wiring
- Shop: Gooseneck Hitch
- Shop: Brake Controller
- Shop: Easy Grease Trailer Hub and Drum Assembly for 8K Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Suspension Enhancement
- Shop: Fifth Wheel Hitch
- Q&A: Weight of 8 Lug Hub and Drum Assembly for 8,000 Pound Axle
- Q&A: Trailer Tire and Wheels for Single Axle 8,000 lb Dump Trailer
- Q&A: Parts Needed to Flat Tow 2024 Chevy Trax Behind Motorhome
- Q&A: Is Roadmaster TruTrac RM-TRACF53 For 1996 Ford F-53 The Entire Kit
- Q&A: Do Trailer Drums have to be Machined or Turned when Replacing Brake Assemblies
- Q&A: Horse Trailer Lift Kit Options
- Q&A: Does Trailer Wheel Hub/Brake Drum Need to Be Replaced if Inside Surface is Grooved
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Slipper Spring Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Adding Electric Over Hydraulic Disc Brakes