How Wide are the Westin Signature Series Round Nerf Bars  

Question:

Helpful Expert Reply:

I called my contact at Westin and he gave me the dimensions for you. The shorter leg on the Westin Signature Series Round Nerf Bars # 25-0900 is 8-1/2 inches from where it attaches to the vehicle mounting bracket to the outside of the bar. The longer leg is 10-1/4 inches from where it attaches to the vehicle mounting bracket to the outside of the bar. These nerf bars will mount to the Blazer's frame, so part of this distance will sit under the vehicle. You can measure out 10-1/4 inches from the rear mounting location to see how far the nerf bar will extend.

I also measured the length as well. From the center of the bolt mounting hole on the shorter leg to the center of the bolt mounting hole on the longer leg is 44-3/4 inches. From the outside of the bar on the short leg to the outside of the bar at the long leg is 47-3/4 inches.

I am attaching a picture that demonstrates the measurements for you.

expert reply by: Jon G

1

click to enlarge