Trailer Hitch Recommendation for 2011 Ford Edge Sport

Question

Question:

Are any of your suppliers working on a hitch for the Sport model?

asked by: Bob

0

Expert Reply:

For your 2011 Ford Edge Sport, I recommend the Draw-Tite # 75728. This trailer hitch has a 2 inch receiver. No drilling or welding is required to install it on your Edge.

I have attached an installation video and the installation instructions for the trailer hitch for you.

expert reply by: Reno H

0

Answer 1

The Ford Edge went through a style change in 2011 and one of the changes involved the tail lights. The earlier generation Edge, including the 2008 models, used a combined wiring system. This means that the same bulb and circuit was used for the turn…

view full answer...

Answer 2

The Tekonsha T-One Wiring Harness #118551 is what you need on your 2007 Ford Edge. I've included the installation video for you to take a look at.

view full answer...

Answer 3

The Draw-Tite trailer hitch, #75992, fits all models of the 2009 Ford Edge except the Sport model so it will fit your AWD model provided it is not a Sport. If it is a Sport, you would use #75686. In terms of what capacity you should use, you will…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Trailer Hitch Recommendation for 2011 Ford Edge Sport

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching