How to Order The Correct Bearing Buddy Size For A 1998 Homemade Trailer
Question:
I have a 1998 Homemade Trailer, model TRLT, Body Style TRLR. Need to find out what size bearing Buddy I need to purchase for my trailer. Thank you
asked by: Angel
Expert Reply:
If you will remove the wheel on your trailer and pull your wheel bearings and get the outer wheel bearing part number that would help you with which Bearing Buddy to use.
The reason you have to go to such lengths to find out what Bearing Buddy Kit you need is that there are so many different variations in bearing/spindle/seal combinations that the only way to be sure you have the right part is to check the equipment you have.
The Bearing Buddy pages also have listings on them for what bearings they fit. I have included a link to a video that demonstrates how to remove a hub and pull the bearings out.
You can also measure the inside diameter of your hub, where the grease caps are attached, but you will need an accurate measuring device like a digital caliper that is accurate to three decimal places (1.781). Once you have the measurement you can then match it to the Bearing Buddy for that particular hub bore size.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.441 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Q&A: How to Determine Which Trailer Roof Vent Cover will Fit a Trailer
- Q&A: How to Convert Oil Bath Trailer Hubs to Grease Hubs
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting Factory Trailer Wiring that has No Power
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Increasing Wheel/Tire Size on Carry-On Utility Trailer
- Q&A: Bearing Buddy to Replace Tie Downs Turbo Lube Oil Bath 48394 Cap?
- Q&A: When Using Bearing Buddy Bearing Protectors Do I Need To Repack Bearings Periodically?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Big Truck Big RV
Eddie
4/22/2013
Hello I have a hub measuring 2.96 do you have a bearing buddy that would fit this Thanks.