Center to Center Distance Between Threaded Parts of U-Bolt 175643
Question:
Can you tell me the distance from center to center of the threaded ends of Replacement U-Bolt with Nuts for 1-3/4inch Round Trailer Axles - 3/8inch Diameter, Code: 175643? I need some u-bolts that able to fit the threaded ends through existing holes that are spaced 2inch from center to center.
asked by: John A
0
Expert Reply:
For u-bolt # 175643 it is 2-1/8 inches on center. All of the 1-3/4 inch, 3/8 suspension u-bolts will be the same. Since it is only 1/8 of an inch off you can probably bend them a little to fit your application.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Replacement U-Bolt with Nuts for 1-3/4" Round Trailer Axles - 3/8" Diameter
- Trailer Suspension Parts
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4-1/4 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Where is Dexter Bearing 31-73-3 Made & Is It Timken
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Watchdog Surge Protector Compatibility With Generator Use
- Article: Where to Position the Trailer Axle?
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: U-Bolt Kit for Smaller Round Axle on Jet Ski Trailer
- Q&A: 1995 Coleman Utah Replacement Leaf Springs Needed
- Q&A: How To Find Replacement Hubs for Triton LT PWC Trailer
- Q&A: Replacement Idler Hub For a 2017 Triton LTWCI-T Boat Trailer With 2,000LB Trailer Axle and Knott Hub
- Q&A: Replacing Harbor Freight Trailer Axle and Mounting on Underside of Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
- Article: Printable Trailer Bolt Hole Pattern Template