Hardware Kit Recommendation to Attach Base Rails of TracRac SR Ladder Rack

Question

Question:

What screws/bolts do I buy to replace lost ones when using this rubber block?

asked by: Jim

0

Expert Reply:

The replacement hardware kit you need is based on the length of your truck bed. If you have a short bed truck you would need the part # TAHD-21501, if you have an 8 foot bed you would need the part # TAHD-21000-A.

expert reply by: Jameson C

0

Gary

5/3/2020

Will this fit a 2020 ram 1500

Reply

Chris R.

5/5/2020

Yes, the replacement hardware kits mentioned above are still correct for the Thule TracRac SR Ladder Racks on your 2020 Ram 1500.

Reply

Answer 1

Replacement Pocket Nut for TracRac SR Sliding Ladder Rack Base Rails - Qty 1 #TA01-2100N has a threaded hole that is 3/8-16.

view full answer...

Answer 2

The best flat tow lighting kit we have for your 2015 GMC Sierra 1500 is the Roadmaster diode kit part #RM-15267. We don't have custom fit lighting kits for all of the vehicles we have at this time and your Sierra is one that we don't have. We…

view full answer...

Answer 3

The Replacement Shock Absorber Spring Kit #TK71-758-00 is the correct shock for your UFP Surge Brake Actuator. The picture you included does not specify if it is for a disc or drum brake set, so I have found both for you to choose from. Disc Brake…

view full answer...

Answer 4

A programmer, such as the Edge CTS3 #EP39YR will give you a slight increase in your 2015 GMC Sierra 1500's mpg. Typically, the mileage improvement is marginal, usually around 1-2 mpg. The actual increase you see will depend on several factors,…

view full answer...

Answer 5

The Edge Evolution CTS3, part #EP39YR is indeed compatible with your 5.3 L equipped 2010 Sierra, unless it's an HD model with the gas engine OR your vehicle is registered in California. The Evolution CTS would provide up to 20 additional HP and…

view full answer...

Answer 6

We have the base rail kit you referenced with our part number #TH21785. This is the base rails for a TracRac SR ladder rack for short bed Ford trucks.

view full answer...

Answer 7

There really isn't a difference between the two ladder racks you mentioned. The TracRac #TA37001 and the Thule TracRac #TH37001XT are both great ladder racks made by the same company but under different brand names. Either one will give you the…

view full answer...

Answer 8

Yes, the adapters needed so the Thule TracRac SR is compatible with the stake pockets on your 2018 Chevy Silverado 1500 are in the 2014+ GM Base Rail Fastener Bag for Thule TracRac SR Sliding Rack #752-186-3001. This comes with some extra hardware…

view full answer...

Answer 9

Per the included instructions diagram, the MDP Composite Base Insert / Replacement Nylon Insert for TracRac Sliding Ladder Rack Modular Base Sliders #TAFX-42008 is referenced in image D as a required part for installation. The Replacement Modular…

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

You will need the Replacement Rubber Block for Base Rail Installation of TracRac Sliding Ladder Racks - Qty 1 #TARB-11032-1. You can get the pocket nut separately #TA01-2100N, but the bolts and other hardware are only available in the Replacement…

view full answer...

Answer 12

The replacement rubber blocks #TARB-11032-1 for your TracRac SR sliding truck bed rails #TH21501 can be removed once installed. But I wouldn't recommend removing and re-installing often because the rubber blocks tend to dry out. It's a good…

view full answer...

Hardware Kit Recommendation to Attach Base Rails of TracRac SR Ladder Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching