How to Get Seperate Wiring on a Trailer From a Tow Vehicle with Combined Wiring
Question:
Dear Sirs Hopkins Towing Solutions tell me you might be able to help. Basically Im looking at converting a traditional combined stop/turn signal setup to a more modern separate stop/turn signal set up. Essentialy the opposite of this : http://www.bugmanweb.com/gsxr/gsxrimages/integrator/hoppy48845.jpg Do you have such a converter? Thank you
asked by: Adam B
Expert Reply:
What you're going to need is part # 118158.
To convert from combined wiring on your tow vehicle to seperate wiring on your trailer you will install the # 118158 on your trailer's wiring between the trailer connector and the lights. Connect the wires as such:
From trailer connector to Input side:
Right Turn to green wire
Ground to white wire.
Left Turn to yellow wire
Output side to lights:
Green wire to right turn signals
Red wire to both brake lights
Yellow wire to left turn signals
The running lights circuit coming from the 4-way (generally the brown wire) will bypass the converter and connect directly to the lights.
To make the installation process easier you might like to add a junction box, like part # 38656, to your trailer.
Products Referenced in This Question
Product Page this Question was Asked From
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Tow Bar Wiring Overview
- Article: Diode Installation Instructions for a Dinghy with Separate Tail Light Wiring
- Q&A: Separating Out a Combined Brake Light and Turn Signal to Have Separate Turn Signals and Brake Lights
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Q&A: Getting Side Marker Lights to Function as Turn Signals and Running Lights
- Q&A: Grease to Oil Bath Trailer Hub Conversion Kit for 3500 Pound Axles
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Separating Trailer Turn Signals and Brake Lights
- Q&A: Do I Need a Charge Line to Flat Tow a 2022 Ram 1500?
- Q&A: How To Determine Blue Ox Spring Bar Weight Capacity