Towing Capacity of 2011 Honda Odyssey Fitted with Draw-Tite Hitch 36417
Question:
Could I tow a trailer with my 2011 Odyssey? I have the Drawtite 36417 hitch.
asked by: DONALD R
Expert Reply:
The Class II Draw-Tite hitch # 36417 has a maximum rated towing capacity of 3500-lbs. This rating applies to the hitch itself and the Odyssey could potentially have a lower or higher towing capacity depending on the particular engine, transmission and accessory options installed at the factory.
I reviewed an online edition of the owner's manual for the 2011 Odyssey and on page 589 the towing capacities, based on passenger count, are listed. These range from the maximum trailer weight of 3500-lbs if there are only 2 passengers to the minimum of 1450-lbs if the vehicle has 7 passengers in it.
Towing also requires a wiring harness to activate the trailer's lights, a ball mount and a hitch ball of the correct size to match your trailer coupler. For 4-pole wiring use plug-in custom kit # 118521. The recommended ball mount is part # 36071 and with it you can use either 2-inch ball # 19258 or 1-7/8-inch ball # 19256.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >